Growing mycelium leather: a paste substrate approach with post-treatments

Article


Crawford, A., Miller, S., Branco, S., Fletcher, J. and Stefanov, D. 2024. Growing mycelium leather: a paste substrate approach with post-treatments. Research Directions: Biotechnology Design. 2, p. 1–10. https://doi.org/10.1017/btd.2024.6
TypeArticle
TitleGrowing mycelium leather: a paste substrate approach with post-treatments
AuthorsCrawford, A., Miller, S., Branco, S., Fletcher, J. and Stefanov, D.
Abstract

This research investigates a novel method for cultivating mycelium-based leather substitutes using a carefully formulated paste consistency substrate. The primary objectives are to enhance nutrient availability, facilitate scalability, and streamline cultivation processes. The study spans a 21-day cultivation period, during which a flower-based medium is employed, eliminating the need for labor-intensive harvesting techniques. Two fungal species, Ganoderma lucidum (rishi) and Pleurotus djamor (pink oyster) are tested to assess their compatibility with the growth method. These species were chosen based on their rapid colonization rates and inherent resilience. The investigation delves into various combinations of crosslinking agents, including glycerol (a plasticizer), commercial tanner, citric acid, and magnesium sulfate. The effects of these agents on tensile strength are compared and qualitative data is analyzed through the use of scanning electron microscopy (SEM) and stereo microscopy. Furthermore, the study explores the fabrication potential of non-woven textiles derived from mycelium, emphasizing their suitability as eco-friendly leather alternatives. Scaled prototypes are highlighted to demonstrate their feasibility. Post-treatment processes, such as dyeing with bio-based dyes and acrylic leather paint, are evaluated for their aesthetic impact. The research contributes a biodegradable material alternative that addresses the environmental challenges of high textile consumption. The findings add to the growing body of sustainable design methods in the realm of leather-like materials in bio-design.

KeywordsFungus; bio-fabrication; bio-textiles; sustainability; bio-design
Sustainable Development Goals9 Industry, innovation and infrastructure
11 Sustainable cities and communities
Middlesex University ThemeSustainability
PublisherCambridge University Press (CUP)
JournalResearch Directions: Biotechnology Design
ISSN
Electronic2752-9452
Publication dates
Online23 Apr 2024
Print2024
Publication process dates
Submitted07 Jan 2024
Accepted09 Apr 2024
Deposited17 Sep 2024
Output statusPublished
Publisher's version
License
File Access Level
Open
Copyright Statement

© The Author(s), 2024. Published by Cambridge University Press.
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution and reproduction, provided the original article is properly cited.

Digital Object Identifier (DOI)https://doi.org/10.1017/btd.2024.6
LanguageEnglish
Permalink -

https://repository.mdx.ac.uk/item/19q2q1

Download files

  • 21
    total views
  • 6
    total downloads
  • 5
    views this month
  • 1
    downloads this month

Export as

Related outputs

Development of a wheelchair stability assessment system: design tools and approaches
Moody, L., Magee, P. and Stefanov, D. 2020. Development of a wheelchair stability assessment system: design tools and approaches. in: McDonagh, D., Moody, L., Woodcock, A., Jain, A. and Jain, L. (ed.) Design of Assistive Technology for Ageing Populations Springer.
A study on the relationship between robotic movement with animacy and visual attention of young children
Lee, J., Aoki, H., Stefanov, D., Yamamoto, T. and Obinata, G. 2016. A study on the relationship between robotic movement with animacy and visual attention of young children. 2016 25th IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN). New York, NY, USA 26 - 31 Aug 2016 IEEE. pp. 682-687 https://doi.org/10.1109/ROMAN.2016.7745192
Tongue interface based on surface EMG signals of suprahyoid muscles
Sasaki, M., Onishi, K., Stefanov, D., Kamata, K., Nakayama, A., Yoshikawa, M. and Obinata, G. 2016. Tongue interface based on surface EMG signals of suprahyoid muscles. Springer Open. https://doi.org/10.1186/s40648-016-0048-0
A concept for control of indoor-operated autonomous wheelchair
Stefanov, D., Avtanski, A. and Bien, Z. 2004. A concept for control of indoor-operated autonomous wheelchair. in: Bien, Z. and Stefanov, D. (ed.) Advances in Rehabilitation Robotics: Human-friendly Technologies on Movement Assistance and Restoration for People with Disabilities Berlin Springer.
Advances in human-friendly robotic technologies for movement assistance/movement restoration for people with disabilities
Stefanov, D. and Bien, Z. 2004. Advances in human-friendly robotic technologies for movement assistance/movement restoration for people with disabilities. in: Bien, Z. and Stefanov, D. (ed.) Advances in Rehabilitation Robotics: Human-friendly Technologies on Movement Assistance and Restoration for People with Disabilities Berlin Springer.
Wheelchairs within the context of smart house design
Stefanov, D. 2008. Wheelchairs within the context of smart house design. in: Helal, A., Mokhtari, M. and Abdulrazak, B. (ed.) The Engineering Handbook on Smart Technology for Aging, Disability and Independence John Wiley & Sons. pp. 439-457
Gait generation for powered Hip-Ankle-Linkage-Orthosis
Lee, J., Mizumoto, R., Obinata, G., Genda, E., Stefanov, D., Aoki, H. and Pei, Y. 2015. Gait generation for powered Hip-Ankle-Linkage-Orthosis. 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Milan, Italy 25 - 29 Aug 2015 Institute of Electrical and Electronics Engineers (IEEE). pp. 5732 -5735 https://doi.org/10.1109/EMBC.2015.7319694
Establishing user needs for a stability assessment tool to guide wheelchair prescription
Moody, L., Evans, J., Fielden, S., Heelis, M., Dryer, P., Shapcott, N., Magee, P. and Stefanov, D. 2017. Establishing user needs for a stability assessment tool to guide wheelchair prescription. Disability and Rehabilitation: Assistive Technology. 12 (1), pp. 47-55. https://doi.org/10.3109/17483107.2015.1063019
Shoulder joint contact force during lever-propelled wheelchair propulsion
Sasaki, M., Stefanov, D., Ota, Y., Miura, H. and Nakayama, A. 2015. Shoulder joint contact force during lever-propelled wheelchair propulsion. Robomech Journal. 2, pp. 1-10. https://doi.org/10.1186/s40648-015-0037-8
Device for wheelchair stability assessment
Stefanov, D. and Avtanski, A. 2014. Device for wheelchair stability assessment.
The design and evaluation of a novel system for predicting wheelchair and occupant stability
Fielden, S. and Stefanov, D. 2014. The design and evaluation of a novel system for predicting wheelchair and occupant stability. 30th International Seating Symposium. The Westin Bayshore, Vancouver, Canada 05 - 07 Mar 2014 pp. 150-153
Tongue motor training support system
Sasaki, M., Onishi, K., Nakayama, A., Kamata, K., Stefanov, D. and Yamaguchi, M. 2014. Tongue motor training support system. Engineering in Medicine and Biology Society (EMBC), 2014 36th Annual International Conference of the IEEE. Chicago 26 - 30 Aug 2014 pp. 3582-3585
Simulation model of a lever-propelled wheelchair
Sasaki, M., Ota, Y., Hase, K., Stefanov, D. and Yamaguchi, M. 2014. Simulation model of a lever-propelled wheelchair. 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’14). Chicago, IL, USA 26 - 30 Aug 2014 pp. 6923-6926
An approach to measure wheelchair stability. concept and benefits
Stefanov, D. and Pasco, D. 2014. An approach to measure wheelchair stability. concept and benefits. 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’14). Chicago, IL, USA pp. 5840-5843
A novel system for wheelchair stability assessment : design and initial results
Stefanov, D., Avtanski, A., Shapcott, N., Magee, P., Dryer, P., Fielden, S., Heelis, M., Evans, J. and Moody, L. 2014. A novel system for wheelchair stability assessment : design and initial results. IEEE international symposium on medical measurements and applications (MeMeA 2014). ISCTE-IUL, the Lisbon University Institute 11 - 12 Jun 2014 pp. 429-433
Enhancement of the communication efficiency of interactive robots for autism therapy by using touch and colour feedback
Lee, J., Takehashi, H., Nagai, C. and Stefanov, D. 2014. Enhancement of the communication efficiency of interactive robots for autism therapy by using touch and colour feedback. Paladyn, Journal of Behavioral Robotics. 5 (1). https://doi.org/10.2478/pjbr-2014-0004
The development and testing of a system for wheelchair stability measurement
Stefanov, D., Avtanski, A., Shapcott, N., Magee, P., Dryer, P., Fielden, S., Heelis, M., Evans, J. and Moody, L. 2015. The development and testing of a system for wheelchair stability measurement. Medical Engineering and Physics. 37 (11), pp. 1061-1069. https://doi.org/10.1016/j.medengphy.2015.08.013
The smart home for older people and people with physical disabilities: structure, technology arrangements, and perspectives
Stefanov, D., Bien, Z. and Bang, W-C. 2004. The smart home for older people and people with physical disabilities: structure, technology arrangements, and perspectives. IEEE Transactions on Neural Systems and Rehabilitation Engineering. 12 (2), pp. 228-250. https://doi.org/10.1109/TNSRE.2004.828423