Development and validation of a finite-element musculoskeletal model incorporating a deformable contact model of the hip joint during gait

Article


Li, J. 2021. Development and validation of a finite-element musculoskeletal model incorporating a deformable contact model of the hip joint during gait. Journal of the Mechanical Behavior of Biomedical Materials. 113, pp. 1-6. https://doi.org/10.1016/j.jmbbm.2020.104136
TypeArticle
TitleDevelopment and validation of a finite-element musculoskeletal model incorporating a deformable contact model of the hip joint during gait
AuthorsLi, J.
Abstract

Musculoskeletal models provide non-invasive and subject-specific biomechanical investigations of the musculoskeletal system. In a musculoskeletal model, muscle forces contribute to the deformation and kinematics of the joint which in turn would alter moment arms of muscles and ground reaction forces and thus affect the prediction of muscle forces and contact forces and contact mechanics of the joint. By far, deformable contact models of the hip have not been considered in musculoskeletal models, and the role of kinematics and deformation within the hip in muscle forces and hip contact mechanics is unknown. In this study, an FE musculoskeletal model including bones, joints and muscles of the lower extremity was developed. A deformable contact model of the hip joint was incorporated and coupled into the musculoskeletal model. Joint angles and ground reaction forces during gait were used as inputs. Optimization minimizing the sum of muscle stresses squared was performed directly to the FE musculoskeletal model in order to simultaneously solve muscle forces and contact forces and contact stresses of the hip joint within a single framework. The calculated hip contact forces corresponded well to the in vivo measurement data. The maximum hip contact stress was 6.5 MPa and occurred at weight-acceptance. The influence of kinematics and deformation in the hip on muscles forces and hip contact forces was minimal and not sensitive to variations in the thickness and properties of the joint cartilage during gait. This suggests that the uncoupled approach in which the hip contact forces and contact mechanics are simulated in separate frameworks would serve as an effective and efficient alternative for subject-specific modelling of the hip. This study provides guidance for the level of complexity needed for future hip models and can be used to evaluate biomechanical changes of the musculoskeletal system following interventions.

Research GroupBiophysics and Bioengineering group
PublisherElsevier
JournalJournal of the Mechanical Behavior of Biomedical Materials
ISSN1751-6161
Publication dates
Online10 Oct 2020
Print01 Jan 2021
Publication process dates
Deposited23 Oct 2020
Accepted07 Oct 2020
Output statusPublished
Accepted author manuscript
License
Copyright Statement

© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Digital Object Identifier (DOI)https://doi.org/10.1016/j.jmbbm.2020.104136
LanguageEnglish
Permalink -

https://repository.mdx.ac.uk/item/89222

Download files


Accepted author manuscript
  • 52
    total views
  • 38
    total downloads
  • 3
    views this month
  • 3
    downloads this month

Export as

Related outputs

Evaluating the biomechanical interaction between the medical compression stocking and human calf using a highly anatomical fidelity three-dimensional finite element model
Lu, Y., Zhang, D., Cheng, L., Yang, Z. and Li, J. 2021. Evaluating the biomechanical interaction between the medical compression stocking and human calf using a highly anatomical fidelity three-dimensional finite element model. Textile Research Journal. 91 (11-12), pp. 1326-1340. https://doi.org/10.1177/0040517520979743
A three-dimensional finite-element model of gluteus medius muscle incorporating inverse-dynamics-based optimization for simulation of non-uniform muscle contraction
Li, J., Marra, M., Verdonschot, N. and Lu, Y. 2021. A three-dimensional finite-element model of gluteus medius muscle incorporating inverse-dynamics-based optimization for simulation of non-uniform muscle contraction. Medical Engineering and Physics. 87, pp. 38 - 44. https://doi.org/10.1016/j.medengphy.2020.11.009
Finite element musculoskeletal modelling framework for coupling of biomechanics and biotribology
Li, J. 2021. Finite element musculoskeletal modelling framework for coupling of biomechanics and biotribology. in: Jin, Z., Li, J. and Chen, Z. (ed.) Computational Modelling of Biomechanics and Biotribology in the Musculoskeletal System: Biomaterials and Tissues Woodhead Publishing. pp. 81-98
Relationship between the morphological, mechanical and permeability properties of porous bone scaffolds and the underlying microstructure
Lu, Y., Cheng, L., Yang, Z., Li, J. and Zhu, H. 2020. Relationship between the morphological, mechanical and permeability properties of porous bone scaffolds and the underlying microstructure. PLoS ONE. 15 (9), pp. 1-19. https://doi.org/10.1371/journal.pone.0238471
Development of a finite element musculoskeletal model with the ability to predict contractions of three-dimensional muscles
Li, J., Lu, Y., Miller, S., Jin, Z. and Hua, X. 2019. Development of a finite element musculoskeletal model with the ability to predict contractions of three-dimensional muscles. Journal of Biomechanics. 94, pp. 230-234. https://doi.org/10.1016/j.jbiomech.2019.07.042
Evaluation of the capability of the simulated dual energy X-ray absorptiometry-based two-dimensional finite element models for predicting vertebral failure loads
Lu, Y., Zhu, Y., Krause, M., Huber, G. and Li, J. 2019. Evaluation of the capability of the simulated dual energy X-ray absorptiometry-based two-dimensional finite element models for predicting vertebral failure loads. Medical Engineering and Physics. https://doi.org/10.1016/j.medengphy.2019.05.007
Stochastic analysis of a heterogeneous micro-finite element model of a mouse tibia
Lu, Y., Zuo, D., Li, J. and He, Y. 2019. Stochastic analysis of a heterogeneous micro-finite element model of a mouse tibia. Medical Engineering and Physics. 63, pp. 50-56. https://doi.org/10.1016/j.medengphy.2018.10.007
Evaluating the theory of bone mechanoregulation in the physiological loading scenario
Lu, Y., Zhao, W., Li, J. and Wu, C. 2018. Evaluating the theory of bone mechanoregulation in the physiological loading scenario. Journal of Mechanics in Medicine and Biology. 18 (2). https://doi.org/10.1142/S0219519418500112
Investigating the longitudinal effect of ovariectomy on bone properties using a novel spatiotemporal approach
Lu, Y., Liu, Y., Wu, C. and Li, J. 2018. Investigating the longitudinal effect of ovariectomy on bone properties using a novel spatiotemporal approach. Annals of Biomedical Engineering. 46 (5), pp. 749-761. https://doi.org/10.1007/s10439-018-1994-x
The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities
Hua, X., Li, J., Jin, Z. and Fisher, J. 2016. The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities. Medical Engineering and Physics. 38 (6), pp. 518-525. https://doi.org/10.1016/j.medengphy.2016.03.004
The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint
Li, J., Hua, X., Jones, A., Williams, S., Jin, Z., Fisher, J. and Wilcox, R. 2016. The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint. Journal of Biomechanics. 49 (9), pp. 1679-1685. https://doi.org/10.1016/j.jbiomech.2016.03.050
Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking
Li, J., McWilliams, A., Jin, Z., Fisher, J., Stone, M., Redmond, A. and Stewart, T. 2015. Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking. Clinical Biomechanics. 30 (5), pp. 513-519. https://doi.org/10.1016/j.clinbiomech.2015.02.014
Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: an initial study
Hua, X., Li, J., Wilcox, R., Fisher, J. and Jones, A. 2015. Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: an initial study. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine. 229 (8), pp. 570-580. https://doi.org/10.1177/0954411915592656
The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements
Hua, X., Li, J., Wang, L., Wilcox, R., Fisher, J. and Jin, Z. 2015. The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements. Medical Engineering and Physics. 37 (10), pp. 1008-1014. https://doi.org/10.1016/j.medengphy.2015.08.003
Experimental validation of a new biphasic model of the contact mechanics of the porcine hip
Li, J., Wang, Q., Jin, Z., Williams, S., Fisher, J. and Wilcox, R. 2014. Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine. 228 (6), pp. 547-555. https://doi.org/10.1177/0954411914537618
Biphasic investigation of contact mechanics in natural human hips during activities
Li, J., Hua, X., Jin, Z., Fisher, J. and Wilcox, R. 2014. Biphasic investigation of contact mechanics in natural human hips during activities. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine. 228 (6), pp. 556-563. https://doi.org/10.1177/0954411914537617
Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: a finite element study with biphasic acetabular cartilage properties
Li, J., Hua, X., Jin, Z., Fisher, J. and Wilcox, R. 2014. Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: a finite element study with biphasic acetabular cartilage properties. Medical Engineering and Physics. 36 (11), pp. 1449-1454. https://doi.org/10.1016/j.medengphy.2014.05.014
Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: implications for preclinical testing
Li, J., Redmond, A., Jin, Z., Fisher, J., Stone, M. and Stewart, T. 2014. Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: implications for preclinical testing. Clinical Biomechanics. 29 (7), pp. 747-751. https://doi.org/10.1016/j.clinbiomech.2014.06.005
Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions
Hua, X., Li, J., Wang, L., Jin, Z., Wilcox, R. and Fisher, J. 2014. Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions. Journal of Biomechanics. 47 (13), pp. 3303-3309. https://doi.org/10.1016/j.jbiomech.2014.08.015
The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers
Li, J., Stewart, T., Jin, Z., Wilcox, R. and Fisher, J. 2013. The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers. Journal of Biomechanics. 46 (10), pp. 1641-1647. https://doi.org/10.1016/j.jbiomech.2013.04.009